Clean Technology That Removes Severe Rust
FEATURES
  • Works quickly
  • Non-abrasive
  • Non-toxic, odorless & non-irritating
  • Biodegradable

BENEFITS

  • Recover & restore rusty parts
  • Reduce need for rework
  • Save money & resources

ZERUST® ICT™620-RR rust remover is compatible with all ZERUST® corrosion inhibiting

  • PART NUMBER
    350-F-00002
  • AVAILABILITY
  • see table below
  • RUST REMOVAL
    1 gallon of ICT™620-RR removes:
    • ~1/2 pound of rusted steel, or
    • 20 sq. ft. of moderately rusted steel (or 300 lbs.)
  • DISPOSAL
    Separate residue from the spent ICT™620-RR solution and properly dispose of according to federal, state and local regulations. Spent ICT™620-RR by itself may be disposed of down the drain and into the sewer. Always consult federal, state and local regulations.
  • SHELF LIFE & HANDLING
    Shelf life of 3 years if stored out of direct sunlight. ICT™620-RR may freeze as it contains a large percentage of water, but will remain fully functional when thawed to ambient temperature.
PRODUCT INFORMATION

Zerust® ICT®620-RR is a highly effective and safe rust remover that completely recovers rusty parts. With Zerust® ICT®620-RR, parts can be completely restored to rust-free condition, replacing labor-intensive, abrasive cleaning that damages surfaces and fails to remove rust from small gear teeth and other difficult-to-reach areas.

Zerust® ICT®620-RR works by bonding with iron to remove iron  from iron oxide. The active ingredient reacts only with iron oxide and therefore, does not harm any other metals and non-metals. Simply soak rusty parts in ICT®620-RR and rinse with de-ionized water. Soak time depends on the degree of rust and varies from a few minutes to a full day

APPLICATION EXAMPLES

RECOVER RUSTED PARTS, SUCH AS OVERSEAS SHIPMENTS, THAT WERE NOT PROTECTED WITH ZERUST® PACKAGING.

REMOVE “FLASH RUST” THAT FORMS ON WORK IN PROGRESS PARTS BEFORE THE NEXT PRODUCTION STEP, SUCH AS BEFORE PAINTING BUT IMMEDIATELY AFTER ABRASION CLEANING.

DIRECTIONS FOR USE:

1. Pour Zerust® ICT®620-RR into a container with the rusted parts (fully cover parts).
2. Soak the rusted parts in Zerust® ICT®620-RR for ~30 minutes for light rust and overnight for heavy, flaking rust. *DO NOT spray the rusty parts with ICT®620-RR - the product will not work this way.
3. Rinse the parts with de-ionized water and inspect.
4. Wipe parts with a dry cloth if needed (some black carbon residue may remain on the metal surface).
5. Repeat soaking if rust remains, and re-rinse.
6. Air dry. Check for areas where solution may have pooled, re-rinse and dry.
7. Package parts in Zerust® products to prevent the recurrence of rust.

Note: When the active ingredients are used up, the Zerust ICT 620 bath will turn black and will not remove rust.

PRODUCT PERFORMANCE COMPARISON:
 
 
Strong Acid
Strong Alkali
Media Blast
(grit, sand,glass, etc.)
Acidic Conversion
(primerpaint)
Effectiveness of Rust Removal
Removes all rust
Removes all rust
Removes only surface rust
Converts surface
rust to paintable tannic acid iron complex
Speed
Light rust: 5-30 min
Heavy rust: ~2 hours-overnight
Light rust: 45-60
min
Seconds to
minutes after
equipment set-up
Light rust: 10-20
min
Ease of Use
Soak parts cold, no agitation
Must be heated,
no agitation
Requires labor to blast and pressure
wash clean
Must be brushed
or sprayed
Harm to Metal
Surfaces
Attacks soft metals,
causes hydrogen
enbrittlement
Attacks soft
metals & paint

Harms soft metals, removes paint

Attacks soft metals
Flammability
Generates explosive
hydrogen
Non-flammable
None
Flammable
Disposal
Must be neutralized
prior to disposal
Must be
neutralized prior
to disposal
Landfill in most cases AFTER
removal of paint
& media
Landfill in most
cases
Equipment
Required
Proper ventilation
Proper
ventilation
Blasting
equipment
Brushes or sprayers
 
Zerust® ICT®620- RR Rust Remover(chelated system)
Removes all rust even in cracks & crevices
Light rust: 5-10min
Heavy rust: ~2hours
Soak parts cold, no
agitation
Completely safe
Non-flammable
Can be put
into city sewer

None

 

AVAILABILITY

Zerust® ICT 620-RR - Rust Remover

 

Nomenclature

Part Number

Size

Shipping Weight

Height

Width

Length

click to enlarge

Rust Remover, Waste-Water Safe

Z350-F-00002QT

1 qt bottle CASE of 12

30

10

11

14

 

Rust Remover, Waste-Water Safe

Z350-F-00002GL

Gal Jug

10

12

12

12

Rust Remover, Waste-Water Safe

Z350-F-00002CS

4X1Gal/Case

36

12

12

12

 

Rust Remover, Waste-Water Safe

Z350-F-00002PL

5 Gal Pail

43

15

12

12

Rust Remover, Waste-Water Safe

Z350-F-00002DR

55 Gal Drum

502 (w drum)

35 (w drum)

24 (w drum)

24 (w drum)

RR … Drum (1 on 1 pallet)

n/a

n/a

532 (w pallet)

39 (w pallet)

42 (w pallet)

42 (w pallet)

 

RR … Drum (4 on 1 pallet)

n/a

n/a

1672 (w pallet)

39 (w pallet)

48 (w pallet)

48 (w pallet)

 

Rust Remover, Waste-Water Safe

Z350-F-00002TT

275 Gal Container

        
 

 

Please contact us at (412) 221-9111 for special GSA or Internet pricing.

© MRN Enterprises, Inc.,
1369 McLaughlin Run Road, Suite 204
Pittsburgh, PA 15241

Cage Code - 3EXE5
GS 02F-0176S
GS 07F-9138S

Phone: (412) 221-9111 . Fax: (412) 221-9181 . Cell: (412) 952-4004
E-mail: ceo@mrnenterprises.com