• Proven corrosion protection
  
• Tailor concentration to your protection needs
  
• Easy to apply and remove
  
• Non-toxic
  

BENEFITS

• Reduces corrosion incidences
  
• Reduce need for rework
  
• Saves money & resources
  
• Comes with ZERUST® global on-site support
  

ZERUST® Axxatec™ 77C can be diluted in different ratios depending on your corrosion protection needs.

• AVAILABILITY/PART NUMBER
  5 Gallon Pail: 350-M-00004PL
  55 Gallon Drum: 350-M-00004DR
  
• PROTECTION TYPE
  Protects ferrous and some nonferrous metals including iron, steel, aluminum, brass, copper, and zinc.
  
• PROTECTION LIFE
  Axxatec™ 77C will protect properly coated metals for up to 4 months under shelter.
  
• DISPOSAL
  Dispose of in sanitary sewer. Always consult federal, states and local regulations.
  
• SHELF LIFE & HANDLING
  Concentrate: Shelf life of 2 years. Diluted Axxatec™ 77C: Shelf life of 1 year; agitate prior to use. Store in original container, at 85º F or less and out of direct sunlight.
  

ZERUST® Axxatec™ 77C is an easy-to-use, water-dilutable corrosion preventive concentrate that contains our proven ICT™ corrosion inhibiting technology. Axxatec™ 77C protects iron, steel, aluminum, brass, copper and zinc for up to four months under shelter.

Use ZERUST® Axxatec™ 77C to protect bare metal surfaces (such as those of golf club shafts) during assembly, large equipment during temporary storage, and in situations where water-based spray-on, in-line production or dipping applications are desired. Axxatec™ 77C can be used in conjunction with ZERUST® Ferrous Film for a more robust solution that provides corrosion protection for up to fi ve years (allow parts to dry prior to packaging).

APPLICATION EXAMPLES

ZERUST® AXXATEC™ 77C WAS SPRAYED ON TO PROTECT THIS LARGE PIECE OF FARM EQUIPMENT PRIOR TO STORAGE.

DIRECTIONS FOR USE:

1. Make sure parts are clean and dry.
   
2. Dilute Axxatec™ 77C with deionized or reverse osmosis water (recommended for optimum performance) in a ratio of 1 part Axxatec™ 77C to 24 parts water. Use vigorous agitation when mixing
   
3. Wear gloves when handling parts to avoid corrosion causing fingerprints.
   
4. Spray, brush or dip metal parts into diluted Axxatec™ 77C.
   
5. Air dry. Drying time is approximately 15 minutes.
   
6. Ship or store parts in protected storage (protects up to four months under shelter).
   

DILUTION RATIOS:

Common dilution ratios for Axxatec™ 77C are 1:4, 1:12 and 1:24. Please contact a ZERUST® Technical Service Representative to discuss the proper dilution ratio for your application.

REMOVAL:

ZERUST® Axxatec™ 77C can be easily removed by using any commercially available alkaline cleaner or solvent. Always check with your customer to see if removal of Axxatec™ 77C is required prior to the use of the protected parts.

ICT™700 SERIES OVERVIEW: LIQUID ADDITIVES & COATINGS:

Please contact us at (412) 221-9111 for special GSA or Internet pricing.